Stock trailers can range from a small bumper pull to a large double deck gooseneck. With a huge array of options to choose from, this is the most versatile stock trailer around. The stock area can be designed with adjustable gate rails and a side ramp for our customers that show cattle, pen systems for those that show small livestock or custom gate location for ranchers with cow/calf operations. We can build from standard floor plans, or customize the trailer to suit your specific needs.
Bumper Pull Stock Aluminum Trailer

Standard Trailer Features
Exterior
- 2-5/16″ Adjustable Coupler with Safety Chains and Breakaway Kit
- Flat Nose
- 8,000 Pound 2″ Square Drop Leg Jack
- .040 One Piece Aluminum Roof Sheet
- Full Length Side Slats with Two Air Spaces and Natural Smooth Sheets
- Rubber Torsion Axles with Electric Breaks
- Radial Tires with Steel Wheels
- Full Width Rear Gates with 1/2 Slide and Pipe Hardware
- 4″ Rubber Docking Bumper
- Escape Gate (Streetside or Curbside)
- 7-Way Plug and Wiring
- Recessed Exterior Light Switches
- LED Turn Signals at Rear
- LED Dome and Clearance Lights
Stock Area
- Center Gate
- Marine Grade Aluminum Treadplate Floor
Base Dimensions
- Stock – 7′ – 102″, Varies, 6’6″+
Popular Options
Air Conditioner
- 13,500 BTU A/C Unit with Heat Strip
- 13, 500 BTU Low Pro A/C Unit with Heat Strip and Thermostat
- Frame for A/C
- Frame and Pre Wire for Future A/C Unit
Axles
- EZ Lube Axles
- Oil Bath Axles
- Tapered Inner Fenders
- Brush Fenders
- Battery and Boxes
- Single Battery Box
- Single Battery Box with Battery
- Dual Battery Box
- Dual Battery Box with (2) Batteries
Battery and Boxes
- Single Battery Box
- Single Battery Box with Battery
- Dual Battery Box
- Dual Battery Box with (2) Batteries
Coupler
- 2-5/16 Fulton Cable Release
- King Pin Coupler on Inner Pipe
Electrical
- Breaker Box, (1)110v Outlet and Shore Plug
- Additional 110v Outlet
- Shore Power Cord, 30amp or 50amp
- Voyager IR Color Camera Systems
Footage
- Add Footage to Stock Area
- Delete Footage from Stock Area
Hayrack
- Hayrack with Aerodyne Nose and Tie Rails
- Enclosed Haypod with Aerodyne Nose
Hooks
Bridle Hooks Welded on Bar
Mats
- Rubber Floor Mats
- WERM Flooring
Miscellaneous
- Chute Rack on Side of Trailer
- Pane Rack on Side of Trailer
- Water Tanks
- Water Tank with Pump
- Waterers
- Misters
- AM/FM/CD with Inside, Outside and Stock Area Speakers
Paint
- Paint Top Rail
- Paint Smooth Sheets
- Paint Side Slat
- Paint Bottom Rail
- Paint Coupler
- Paint Landing Gear and Handle
- Paint Rear Corner Posts and Rear Header
- Paint Door or Ramp
Pens and Accessories
- Adjustable Pens (50/50 and 60/40)
- Split Pens
- Add 12″ Height to Standard Pens
- Low Latches on Pen Gates
- Feeder Bracket Rods
- 60/40 or 50/50 Removable Pens with Removable Full Height Posts
Ramps
- 48″ Tall Spring Loaded Rear Ramp
- 52″ Tall Spring Loaded Rear Ramp
- Full Height Spring Loaded Side Ramp
Roof
- Insulate and Line Roof and Top Rail (Natural Aluminum)
- Insulate and Line Roof and Top Rail (White)
Trays
Additional Brush Trays
Vents
- 6″ Butterfly Vent
- Two-Way Roof Vent
Awnings
Domestic 2 Step Awning
Brakes
- Electric / Hydraulic Brakes
- Electric / Hydraulic “Disc” Brakes
Clothes Rod
- Clothes Rod (5 Feet)
- Clothes Rod (5+ Feet)
Exterior Skin
- Pre-Painted White Exterior Skin (Standard)
- Pre-Painted Black Exterior Skin
- Pre-Painted Gray Exterior Skin
- Pre-Painted Red Exterior Skin
- Custom Painted Exterior Skin
- Mill Finish (Natural) Exterior Skin
- Stainless Steel Nose Sheets
- Stainless Steel Side Sheets
- Polished Slat
- Polished Fenders
- Polished Top Rail
- Polished Bottom Rail
- Polished Door Frames and Flush Mount
- Polished Rear Corner Posts and Rear Header
- 2″ Air Space Above Fenders
- Additional Air Spaces
- Removable Filler Slat
- Hinged Slat to Cover Air Gap
- Close in Air Spaces with Smooth Skin
Floors
- Corrugated Treadplate Floor
- High Grip Flat Treadplate Floor
- High Grip Corrugated Treadplate Floor
- Full-Width Traction Bars
- Toe Board
Gates (Center)
- 1/2 Slide Gate Inside Center Gate
- 1/2 Swing Gate Inside Center Gate
- 3/4 Swing Gate Inside Center Gate
- Full Swing Gate Inside Center Gate
- Additional Center Gates (and Settings)
- Slide Rail for Center Gates
- Make Center Gate Slide Between Fenders (Slide Rail Gate Only)
- No Step 1/2 or 3/4 Swing Gate Inside a Center Gate (Slide Rail Gate Only)
- Run Center Gate at Slant (with Stock Trailer Slam Latch)
- Run Center Gate at Slant (with Horse Trailer Slam Latch)
- Slam Latch on Swing Gates on Slide Rail
- Flow Thru Bars Top of Center Gate (Replaces Slats and Air Gaps)
Gates (Escape)
- Make Standard Escape Gate Wider (37″ to 50″)
- Sliding Escape Gate (Slides on Outside of Trailer)
- Add Single Pipe Hardware to Escape Gate
- Frame and Seal Escape Gate
- Additional Escape Gate
Gates (Rear)
- Full Width Rear Gate (No 1/2 Slider)
- Full Width Rear Gate with Roll Up Gate
- Double Rear Gates with Double Pipe Hardware
- Exterior Safe Load Spring Laod Slam Latch (For Full Width Rear Gates)
- Double Swing Full-Width Rear Gate with Double Pipe Hardware (Gates will Open Streetside or Curbside)
Height
6′ 6″ (Standard) with Options to Increase Height in 6″ Increments (6′ Available)
Jacks
- 3.5K Electric Jack
- Hydraulic Single-Leg Jack
Lights
- Clear Lens LED Clearance Lights
- LED Running Lights on Bottom Rail
- Add Standard LED Dome Lights (390 Lumens)
- LED 6″x18″ Dome Lights (880 Lumens)
- Extra LED Turn Signals Mounted in Slats
- Porch Light
- Additional LED Clearance Lights
- Backup Lights
- 3/4″ LED Button Lights (Replace Standard Lights)
- Extra LED Turn Signals Mounted in Fender
- Halogen Load Lights
- Halogen High-Intensity Load Light
- LED Scene Load Light
- LED High Turn on Rear
Nose
- Wedge Nose
- Tread Plate Gravel Guard (18″)
Plexiglass
- Plexiglass (Sides)
- Plexiglass and Track (Rear and Escape Gates)
- Plexiglass Track Only (Rear and Escape Gates)
- Plexiglass Storage in Gooseneck
Ties
- Welded Trailer Ties (Interior)
- Bolted Ties (Exterior)
- Tie Rails (Interior)
- Outside Tie Rails (Polished or Unpolished)
Wheels
- Steel Simulators
- Alcoa Aluminum Wheels
- Width
- 7′ (Standard), 7’6″, 8′, 100″ and 102″
Wall Lining
- Rubber, Double Wall, and Insulate Stock Walls
Trailer Details
Components
Doors
All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.
Drop Bars
Elite built drop down bar mechanism is machined to allow ease of use. Independent from the drop down door allows for simple use.
Lighting
Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.
Horse Dividers
With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength.
Bulkhead Wall
.090″ smooth sheet welded on to our heavy duty wall posts.
Lining and Insulation
With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.
Axles and Tires
Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it’s contents, including living quarters.
Hinges
Elite’s proprietary, heavy duty, extruded hinge is used for doors and dividers. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.
Windows
Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.
Saddle Racks
The Elite built carpeted saddle racks are designed to hold a large variety of today’s saddles.
Wall Rubber
The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.
Carpet
Marine grade carpeting is used in the tack room and other applications to assure a long life.
Structure
Top Rail
Continuous 5″ radius rail with an overall height of 8″ and a material thickness of 3/16″ with an integrated drip rail.
Drop Gusset
3/16″ thickness, welded one piece gussets which add structure to provide maximum nose strength.
Drop Wall
3/16″ thickness with an engineered break on the top and bottom adds strength and allows for a cleaner weld area to ensure against leakage.
Flooring
Elite’s floor structure consists of 4″ I beams with an upper 2 1’2″ flange and a lower 3″ flange on 9-5/8″ centers. Elite utilizes a 5086 marine grade tread plate floor on top of the structure.
Rear Frame
The rear frame is supported by a 2 1/2″ x 5″ upper header at a 1/4″ thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.
Aluminum Side Wall Construction
6005 T6 aluminum alloy posts with 7″ posts at the drop wall, 5″ x 1 3/8″ at doors and dividers, and 1 3/8″ x 2 1/2″ for all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063″.
Roof Construction
1″ x 2 1/2″ arched roof bows with one piece, .040″ thick 3003 H16 aluminum roof sheet.