• 2-5/16″ Adjustable Coupler with Safety Chains and Breakaway Kit
• Single Speed Jack
• 8′ Long Nose with 2′ Taper
• .040 One Piece Aluminum Roof Sheet
• Full-Length Side Slats with White Smooth Sheets Above
• Side Load Door with Optional Ramp
• Rubber Torsion Axles with Electric Breaks
• Radial Tires with Steel Wheels
• Stainless Steel Wheel Simulators
• Hehr 19″x34″ Nose Windows
• Escape Door on Streetside at Last Horse with Locking Seal Plate*
• 50/50 Double Rear Doors with Hehr Windows and Locking Seal Plates
• 4″ Rubber Docking Bumper
• Two Exterior Ties per Stall
• Halogen Load Light at Rear
• LED Dome and Clearance Lights
• 7-Way Plug and Wiring
• Recessed Exterior Light Switches
• LED High and Low Turn Signals at Rear
• LED Dome and Clearance Lights

• Breast/Butt Bars at All Horse Area Doors
• Hehr 15’x34″ Sliding Windows with Welded Bars (Hip Side)
• Drop Down Feed Doors with Hehr Windows (Head Side)
• Lined and Insulated Head and Rump Walls
• Bulkhead Wall
• Two Interior Ties per Stall
• Rubber on Wall at Hip/Head/Wall in Horse Area
• .125 Smooth Aluminum Floor (5052 Marine Grade)
• Premium Rubber Mats on Floor in Horse Area
• Slatted Dividers with Stall Pads
• One Feed Bag per Horse
• One Roof Vent per Stall

• Slant Reverse Load – 7’ Width, Length Varies, 7’ Height

• Dressing Room Door with Camper Latch and Hehr Windows
• Marine Carpet on Dress Floor, Drop, and Bed

• Full-Width Rear Tack Compartment
• One Saddle Rack per Horse
• Blanket Bar
• 10 Bridle Hooks
• Brush Trays

• 13,500 BTU A/C Unit with Heat Strip
• 13, 500 BTU Low Pro A/C Unit with Heat Strip and Thermostat
• Pre-Wire for Future A/C Unit

• Ridewell Semi-Style Air Ride
• STI Cargo Max Air Ride
• EZ Lube Axles
• Oil Bath Axles
• Tapered Inner Fenders

• Single Battery Box
• Single Battery Box with Battery
• Dual Battery Box
• Dual Battery Box with (2) Batteries
• 3′ Carpeted Boot Box with Lid
• 4′ Carpeted Boot Box with Lid
• Full Width, Carpeted Boot Box with Dual Lids

• Carpeted Walls and Doors in Rear Tack
• Carpeted Walls in Dress
• Carpeted Bulkhead Wall in Dress
• Line/Insulate/Carpet Walls in Dress

• 2-5/16 Fulton Cable Release
• King Pin Coupler on Inner Pipe

• Additional Width to Dressing Room (37″ to 50″)
• Double Side Tack Doors with Single Pipe Hardware
• HEHR Camper Door with Window and Screen
• Additional Dress Doors
• Double Side Tack Doors with Internal Latch, Camper Latch, and Combo Lock

• Escape Door at 1st Horse on Curbside
• 3/4 Escape Door
• Delete Escape Door

• Breaker Box, (1)110v Outlet and Shore Plug
• Additional 110v Outlet
• Shore Power Cord, 30amp or 50amp
• Voyager IR Color Camera Systems

• Add Footage to Dressing Room
• Delete Footage from Dressing Room
• Add Footage to Horse Area
• Delete Footage from Horse Area

• Hayrack with Aerodyne Nose and Tie Rails
• Enclosed Haypod with Aerodyne Nose
• Integrated Haypod
• Enclosed Haypod with Extended Sides and Aerodyne Nose
• Recessed Ladder
• Telescoping Ladder

Additional Bridle Hooks

• Add Camper Door Latch to Any Door
• Chrome Handles and Latches

Keyless Combination Deadbolt Lock

• Rubber Floor Mats
• WERM Flooring
• Equifoam Under Floor Mats

• Paint Top Rail
• Paint Top Rail and Bottom GN Rail
• Paint Drop Gussets
• Paint Smooth Sheets
• Paint Side Slat
• Paint Bottom Rail
• Paint Coupler
• Paint Landing Gear and Handle
• Paint Rear Corner Posts and Rear Header
• Paint Door or Ramp

• 48″ Tall Spring Loaded Rear Ramp
• 52″ Tall Spring Loaded Rear Ramp
• Spring Loaded Rear Ramp behind Single or Double Doors
• Spring Loaded Side Ramp with Single or Double Dutch Doors Above

• Insulate and Line Roof and Top Rail (Natural Aluminum)
• Insulate and Line Roof and Top Rail (White)

• Additional Racks
• Extra Saddle Rack Locations
• Removable Saddle Rack Post
• Removable Saddle Rack from Post
• Swinging Saddle Rack
• Make Saddle Rack up to 12″ Longer
• Delete Saddle Racks

HWH Hydraulic Slide Out

Additional Brush Trays

• Lunar Dome Roof Vent
• Two Way Roof Vent
• 12v Fans

• Line and Insulate Dress Wall (White)
• Line and Insulate Dress Wall (Natural Aluminum)

7′ (Standard), 7′ 6″, 8′, 100″ and 102″

Domestic 2 Step Awning

• Drop Down Window Bars for Feed Doors
• Full Height Blanket Tree
• Carpeted Splint Boot Bars
• Swinging and Removable Blanket Tree
• Swing Out Blanket Bars

• Electric / Hydraulic Brakes
• Electric / Hydraulic “Disc” Brakes

• Clothes Rod (5 Feet)
• Clothes Rod (5+ Feet)

• Flow Thru Divider and Head Shield
• Full to Bottom Divider
• Full to Top Divider
• Removable Lower Divider Panel
• Hanging Rubber on Divider
• Telescoping Divider

• Drop Down Door with Window on Curbside in lieu of Bus Windows
• Drop Down Door with Window in Rear Load Door
• Access Door
• Access Door in Gooseneck
• Walk Thru Door in Bulkhead

• 56/44 Rear Door Setup (Standard)
• 50/50 Rear Door Setup
• 60/40 Rear Door Setup
• Double Rear Doors with Double Pipe Hardware
• Full Width Rear Ramp with Two Dutch Doors Above
• 50/50 Double Rear Doors with Windows, Internal Latch, Camper Latch and Combo Lock (Full Width Rear Tack)
• Hinge Rear Tack Door on Center Post
• Double Rear Doors with Single Pipe Hardware
• Rear Load Door with Streetside Entry Rear Tack Door
• Single 48″ Door in Center of Rear (Full Width Rear Tack)

• Pre-Painted White Exterior Skin (Standard)
• Pre-Painted Black Exterior Skin
• Pre-Painted Gray Exterior Skin
• Pre-Painted Red Exterior Skin
• Custom Painted Exterior Skin
• Mill Finish (Natural) Exterior Skin
• Stainless Steel Nose Sheets
• Stainless Nose and Gooseneck Side Sheets
• Stainless Steel Side Sheets
• Polished Slat
• Polished Fenders
• Polished Top Rail
• Polished Bottom Rail
• Polished Door Frames and Flush Mount
• Polished Rear Corner Posts and Rear Header
• Polished Drop Gussets
• Two Air Spaces on Curbside in lieu of Bus Windows

• Generator Shelf and Vented Door (Rear Tack)
• Generator Compartment in Last Manger with Vented Door (24″ Manger)
• 48″ Deep Full Width Generator Platform on Roof with No Box
• 48″ Deep Full Width Platform on Roof with Vented Generator Box
• Generator Platform with Vented Box
• Vented Generator Box Located in Hay Rack

7′ (Standard) with Options to Increase Height in 6″ Increments

• Spring Loaded Jack
• Dual Single Speed Jack
• Single 2-Speed Jack
• Dual 2-Speed Jacks
• Equalizer Hydraulic Single Leg Jack
• Equalizer Dual Hydraulic Jack

• Clear Lens LED Clearance Lights
• LED Running Lights on Bottom Rail
• Add Standard LED Dome Lights (390 Lumens)
• Extra LED Turn Signals Mounted in Slats
• LED Load Light
• LED Load Light Flush Mount
• Porch Light
• LED Dome Light Place Under Nose
• Additional LED Clearance Lights
• Backup Lights
• 3/4″ LED Button Lights (Replace Standard Lights)
• Extra LED Turn Signals Mounted in Fender
• Halogen Load Lights
• Halogen High Intensity Load Light
• LED Scene Load Light
• LED 6″x18″ Dome Lights (880 Lumens)

• 18″ Deep Mangers (1 Door Every Two Mangers)
• 24″ Deep Mangers (1 Door Every Two Mangers)
• Lower Front of Manger 1-1/2″
• Additional Manger Access Doors
• Add Solid Partition in Manger
• Add Rubber on Inside Wall of Manger
• Swing Out Manger with Access Door on Escape Door

• Full Nose
• Enclose Under Nose with 3 Doors
• Enclose Under Nose with Roll Up Door
• Enclose Under Nose with Full Width Lift Door with (2) Access Doors in Lift Up Door

Plexiglass

• Collapsible Rear Tack and Removable Saddle Rack and Rear Post
• Full Width Rear Tack (Side and Reverse Load Trailers)
• Streetside Entry Rear Tack
• Permanent Sealed to Top

• Rubber Both Sides of Removable Panel or Full to Floor Divider
• Add Rubber on Top 1/2 of Bulkhead Wall (Horse Area Side)
• Rubber on Top 1/2 of Rear Tack Wall

• Corner “V” Shelves
• Hat Shelf Only
• Hat Shelf with Bridle Hooks Underneath
• Hat Shelf with Clothes Underneath
• Fold Up Shelf
• Removable Shelf

• Fold Up Camper Step (Dress, Escape and Rear Tack Doors)
• Step Cleats

• Welded Trailer Ties (Inside)
• Bolted Ties (Exterior)
• Bolted Stainless Steel Ties (Exterior)

• Aluminum Water Tank, 25-50 Gallons
• 25 Gallon V-Style Plastic Tank and Stand
• 50 Gallon Plastic Tank with Pump
• 100 Gallon Plastic Tank with Pump
• Water Pump for Tank

Alcoa Aluminum Wheels

• Sliding
• Jalousie
• Kickout

All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.

Elite built drop down bar mechanism is machined to allow ease of use. Independent from the drop down door allows for simple use.

Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.

With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength.

.090″ smooth sheet welded on to our heavy duty wall posts.

With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.

Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it’s contents, including living quarters.

Elite’s proprietary, heavy duty, extruded hinge is used for doors and dividers. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.

Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.

The Elite built carpeted saddle racks are designed to hold a large variety of today’s saddles.

The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.

Marine grade carpeting is used in the tack room and other applications to assure a long life.

Continuous 5″ radius rail with an overall height of 8″ and a material thickness of 3/16″ with an integrated drip rail.

3/16″ thickness, welded one piece gussets which add structure to provide maximum nose strength.

3/16″ thickness with an engineered break on the top and bottom adds strength and allows for a cleaner weld area to ensure against leakage.

Elite’s floor structure consists of 4″ I beams with an upper 2 1’2″ flange and a lower 3″ flange on 12″ centers. Elite utilizes a .125″ thick, 5052 marine grade sheet floor on top of the structure.

The rear frame is supported by a 2 1/2″ x 5″ upper header at a 1/4″ thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.

6005 T6 aluminum alloy posts with 7″ posts at the drop wall, 5″ x 1 3/8″ at doors and dividers, and 1 3/8″ x 2 1/2″ for all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063″.

1″ x 2 1/2″ arched roof bows with one piece, .040″ thick 3003 H16 aluminum roof sheet.