NEW 2024 Elite Trailers 4GSC 26' Stock / Stock Combo Trailer!
Stock Combo Horse Trailers are engineered to deliver rugged good looks and the durability to stand up to a wide range of hauling. With a heavy duty, engineered structure the Stock Combo Horse Trailer works hard with you, not against you.
GVW: 17,246 LBS
Empty weight: 6,270 LBS

Upgraded Features:
Width- change width from 7' to 7'6" wide--up to 30' of box length
Footage- add length in dress area, makes 38" short wall dress
Footage- add length to stock combo in stock area, makes 124" rear stall
Jack- 12k hydraulic single leg jack with cover
Battery- single battery box wired up with battery
Tire- (5) LT235/85R16 load range G wheel and tire
Wheel- Alcoa aluminum wheel
Exterior skin- pre-painted gray skin
Nose- SSTL on nose
Door- dressing room door with window
Door- make door wider, 42" dress door
Gate- additional center gate
Gate- run center gate at slant
Light- LED awning style load light- chrome plastic housing
Light- LED extra high turn signals
Light- additional LED dome light
Tie- add trailer ties outside bolt on
Bars- additional blanket bar
Bars- make blanket bar swing out
Saddle rack- additional saddle rack
Saddle rack- offset swingout post for saddle racks
Hooks-20 bridal hooks
Trays- additional brush tray
Mat- floor mats
Mat- werm flooring installed
Rubber- rubber, double wall and insulate
Carpet- carpet on bulkhead wall
Step- fold up step
Track- track only for plexiglass
Box- carpeted boot box with split, hinged lid, full width of drop
Lock- keyless dead bolt lock
Hayrack- 8' Aerodyne hayrack with ladder and tie rail
Standard Features:
Exterior-
2-5/16" Adjustable Coupler with Safety Chains and Breakaway Kit
Single Speed Jack
8' Long with 2' Tapered Nose
.040 One Piece Aluminum Roof Sheet
Full Length Side Slats with Two Air Spaces and White Smooth Sheets
Rubber Torsion Axles with Electric Breaks
Radial Tires with Steel Wheels
Stainless Steel Hub Caps
Full Width Rear Gates with Pipe Hardware
4" Rubber Docking Bumper
Escape Gate on Streetside at 1st Horse with Breast Bar
One Exterior Tie per Stall
.125 Smooth Aluminum Floor (5052 Marine Grade)
7 Way Plug and Wiring
LED Dome and Clearance Lights
LED Turn Signals at Rear
Recessed Exterior Light Switches
Stock Area-
Two Interior Ties per Stall
Bulkhead Wall
Rubber on Bulkhead Wall (Stock Side)
Premium Rubber Mats on Floor in Horse Area
Slatted Dividers with Stall Pads
Marine Carpet on Floor, Drop and Bed in Dress

Dress-
Dressing Room Door with Hehr Window and Camper Latch
Premium Rubber Mats on Floor in Dress
10 Bridle Hooks
One Saddle Rack per Horse
Trailer Details
Components-
Doors: All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.
Lighting: Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.
Bulkhead Wall: .090" smooth sheet welded on to our heavy duty wall posts.
Lining and Insulation: With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.
Axles and Tires: Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it's contents, including living quarters.
Hinges: Elite's proprietary, heavy duty, extruded hinge is used for doors and dividers. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.
Windows: Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.
Saddle Racks: The Elite built carpeted saddle racks are designed to hold a large variety of today's saddles.
Wall Rubber: The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.
Carpet: Marine grade carpeting is used in the tack room and other applications to assure a long life.
Structure-
Top Rail: Continuous 5" radius rail with an overall height of 8" and a material thickness of 3/16" with an integrated drip rail.
Drop Gusset: 3/16" thickness, welded one piece gussets which add structure to provide maximum nose strength.
Drop Wall: 3/16" thickness with an engineered break on the top and bottom adds strength and allows for a cleaner weld area to ensure against leakage.
Flooring: Elite's floor structure consists of 4" I beams with an upper 2 1'2" flange and a lower 3" flange on 12" centers. Elite utilizes a .125" thick, 5052 marine grade sheet floor on top of the structure.
Rear Frame: The rear frame is supported by a 2 1/2" x 5" upper header at a 1/4" thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.
Aluminum Side Wall Construction: 6005 T6 aluminum alloy posts with 7" posts at the drop wall, 5" x 1 3/8" at doors and dividers, and 1 3/8" x 2 1/2" for all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063".
Roof Construction:1" x 2 1/2" arched roof bows with one piece, .040" thick 3003 H16 aluminum roof sheet.
Financing Available!
While we always strive for complete accuracy, please confirm specifications with one of our sales reps .