Dealer Contact
Image Gallery
4G
Stock #E20994
  • Year: 2023
  • Type: Horse Trailer
  • Horses: 4 Horses
  • Living Quarters: No Living Quarters
  • New: See Dealer
Description:
NEW 2023 Elite Trailers 4 Horse GN Trailer Fully Loaded With Up To 1,500 Miles Of Free Delivery!

WE ARE OFFERING UP TO 1,500 MILES OF FREE DELIVERY ON THIS TRAILER!
GVW: 17, 569 LBS
Empty Weight: 7,440 LBS

Upgraded Features:

Width: 7'6"
Footage: 52" rear stall
Footage: 68" short wall dress
Jack: 12k hydraulic single leg jack with cover
Battery: single battery box wired up with battery
Tires: LT235/85R16 load range G wheel and tire (ILO standard load range E)-rated 3,750# each
Nose: stainless steel on nose
Door: drop down door with window ILO standard with latch placed at bottom- 1st and 3rd stall curbside
Bars: drop down window bars with custom latch system
Door: move rear door tack door to street side-make rear tack same depth as manger-makes 1 large load door with window, single pipe hardware and full width butt chain
Door: dressing room with window
Door: 40" dress door street side, 40" dress door curbside 30" bod
Manger: manger (per horse) 18" deep-48" to top of lip above rubber-4-3/4" deep pan (1 door every 2 mangers)
Manger: add manger access door
Light:3/4" button LED running lights
Light: Additional 3/4" button LED running lights, 5 each side, 3 on nose
Light: LED "awning style" load light- chrome plastic housing (2" x 18") (700 lumens each)-2 street side, 2 curbside, rear
Light: Additional standard LED dome lights (390 lumens) (each)- 2 dress, 2 horse area, 1 rear tack, 2 mangers
Bars: additional blanket bar (each)
Bars: make blanket bar rack swing out- makes 4 on swing out on curbside and street side dressing doors
Saddle rack: additional saddle rack (each saddle)
Saddle rack: offset swingout post for saddle racks- makes 4 on swing out on street side and curbside
Hooks: bridal hooks welded on bar-makes 20 bridal hook wall, 5 broom closet
Trays: addition brush trays- makes 2 on street side and 2 on curbside dress doors
Mats: floor mats in dressing area
Mats: werm flooring in horse area ILO standard rubber floor mats
Carpet: carpet on bulkhead wall and bed/drop
Step: fold up step (12" tall extruded) running board stops at dress doors
Misc: reinforcement structure
Roof: insulate and line roof and top rail with white skin- horse area
Box: carpet boot box with split, hinged lid, full width of drop
Lock: keyless dead bolt lock- dress doors
Hay rack: 8' aerodyne hayrack with ladder and tie rail

Standard Features:

Exterior - 2-5/16" Adjustable Coupler with Safety Chains and Breakaway Kit
Full Length Side Slats with White Smooth Sheets Above
8' Long Nose with 2' Taper
.040 One Piece Aluminum Roof Sheet
Single Speed Jack
Rubber Torsion Axles with Electric Breaks
Radial Tires with Steel Wheels
Stainless Steel Wheel Simulators
Hehr 19"x34" Nose Windows
Hehr 15'x34" Sliding Windows with Welded Bars (Hip Side)
Dressing Room Door with Camper Latch and Hehr Windows
Drop Down Feed Doors with Hehr Windows (Head Side)
Escape Door on Streetside at 1st Horse with Locking Seal Plate*
56/44 Double Rear Doors with Hehr Windows and Locking Seal Plates
4" Rubber Docking Bumper
Halogen Load Light at Rear
7 Way Plug and Wiring
Recessed Exterior Light Switches
LED High and Low Turn Signals at Rear
LED Dome and Clearance Lights

Horse Area-


Breast/Butt Bars at All Horse Area Doors
Two Exterior and Interior Ties (per Stall)
Lined and Insulated Head and Rump Walls
Rubber on Wall at Hip/Head/Wall in Horse Area
.125 Smooth Aluminum Floor (5052 Marine Grade)
Premium Rubber Mats on Floor in Horse Area
Slatted Dividers with Stall Pads
One Feed Bag per Horse
One Roof Vent per Stall
Bulkhead Wall

Dress-

Marine Carpet on Dress Floor, Drop and Bed
Tack - Permanent Rear Tack
One Saddle Rack per Horse
Blanket Bar
10 Bridle Hooks
Brush Trays

Trailer Details:
Components-

Doors: All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.

Drop Bars: Elite built drop down bar mechanism is machined to allow ease of use. Independent from the drop down door allows for simple use

Lighting: Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.

Horse Dividers: With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength

Bulkhead Wall: .090" smooth sheet welded on to our heavy duty wall posts.

Lining and Insulation: With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.

Axles and Tires: Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it's contents, including living quarters.

Hinges: Elite's proprietary, heavy duty, extruded hinge is used for doors and dividers. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.

Windows: Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.

Saddle Racks: The Elite built carpeted saddle racks are designed to hold a large variety of today's saddles.

Wall Rubber: The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.

Carpet: Marine grade carpeting is used in the tack room and other applications to assure a long life.

Structure-

Top Rail: Continuous 5" radius rail with an overall height of 8" and a material thickness of 3/16" with an integrated drip rail.

Drop Gusset: 3/16" thickness, welded one piece gussets which add structure to provide maximum nose strength.

Drop Wall: 3/16" thickness with an engineered break on the top and bottom adds strength and allows for a cleaner weld area to ensure against leakage.

Flooring: Elite's floor structure consists of 4" I beams with an upper 2 1'2" flange and a lower 3" flange on 12" centers. Elite utilizes a .125" thick, 5052 marine grade sheet floor on top of the structure.

Rear Frame: The rear frame is supported by a 2 1/2" x 5" upper header at a 1/4" thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.

Aluminum Side Wall Construction: 6005 T6 aluminum alloy posts with 7" posts at the drop wall, 5" x 1 3/8" at doors and dividers, and 1 3/8" x 2 1/2" for all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063".

Roof Construction: 1" x 2 1/2" arched roof bows with one piece, .040" thick 3003 H16 aluminum roof sheet.

Financing Available!

While we always strive for complete accuracy, please confirm specifications with one of our sales reps.
Enjoy The Elite Experience by signing up for our monthly newsletter.
Get the latest updates on Elite products, news, promotions and more.