Low Pro Bumper Pull

Sample images are shown in various trailer sizes with additional options and features.
  • Features
  • Options
  • Components
  • Structure
  • Brochures
  • Floor Plans
  • Gallery
  • Downloads

Low Pro Bumper Pull

Standard Trailer Features

Sample images are shown in various trailer sizes with additional options and features.

While maintaining the heavy duty, engineered structure of our Stock Trailers, the Low Pro Livestock trailer is designed for smaller animals like pigs, lambs and sheep. From pens systems to center gates, the option list for this trailer allows you to customize the trailer based on your needs.

Low Pro
  • 2-5/16" Bulldog Coupler with Extended 12' Tongue with Safety Chains and Breakaway Kit
  • Side Slats with Two Air Spaces High and One Low with Natural Smooth Sheets on Dress and Nose
  • 8,000 2" Square Drop Leg Jack
  • 3' Wedge Nose
  • Rubber Torsion Axles with Electric Brakes
  • Radial Tires with Steel Wheels
  • Escape Gate
  • Marine Grade Aluminum Treadplate Floor
  • Front Tack Compartment with Dressing Room Door with Window
  • Marine Grade Carpet on Drop and Bed, Rubber Mat on Floor
  • Smooth Skin Drop Gate
  • 7 Way Plug and Wiring
  • LED Turn Signals at Rear
  • LED Dome and Clearance Lights
  • Double Rear Doors with Windows and Removable Center Post and Locking Seal Plates
  • Recessed Exterior Light Switches

Low Pro Bumper Pull

Popular Trailer Options

Low Pro
Air Conditioner
  • 13,500 BTU Air Conditioner with Heat Strip
  • 13,500 BTU Low Profile Air Conditioner with Heat Stip and Thermostat
  • Pre-wiring for Future A/C Unit
  • Domestic 2 Step Awning
  • EZ Lube Axles
  • Oil Bath Axles
Battery and Boxes
  • Single Battery Box
  • Dual Battery Box
  • Single Battery Box with Battery
  • Dual Battery Box with (2) Batteries
  • 3' Carpeted Boot Box with Lid
  • 4' Carpeted Boot Box with Lid
  • Full Width, Padded Boot Box with Dual Lids
  • Full Width, Carpeted Boot Box with Dual Lids
  • Carpet Walls in Dress
  • Carpet Bulkhead Wall in Dress
  • Line/Insulate/Carpet Side Walls in Dress
Clothes Rods
  • Clothes Rod (5 Feet)
  • Clothes Rod (5+ Feet)
  • Walk Thru Door in Bulkhead Wall
  • Breaker Box, (1)110v Outlet and Shore Plug
  • Shore Power Cord, 30amp or 50amp
  • Additional 110v Outlet
  • Voyager IR Color Camera Systems
Exterior Skin
  • Mill Finish (Natural) Exterior Skin (Standard)
  • Smooth Skin with HEHR Drop Down Windows in lieu of Air Spaces
  • Pre-Painted White Exterior Skin
  • Pre-Painted Black Exterior Skin
  • Pre-Painted Gray Exterior Skin
  • Pre-Painted Red Exterior Skin
  • Custom Painted Exterior Sheets
  • Stainless Nose Sheet
  • Polished Slat
  • Polished Fenders
  • Polished Top Rail
  • Polished Bottom Rail
  • Polished Door Frames and Flush Mount
  • Polished Drop Gussets
  • Polished Rear Corner Posts and Rear Header
  • Hinged Slat to Cover Air Gap
  • Add Footage to Dressing Room
  • Add Footage to Stock Area
  • Delete Footage from Stock Area
Gates (Center)
  • Slide Rail for Center Gate
  • Slam Latch on Swing Gates on Slide Rail
  • 1/2 Slide, 1/2 Swing or 3/4 Swing Gates Inside of Center Gate
  • No Step 1/2 or 3/4 Swing Gate Inside a Center Gate (Slide Rail Gate Only)
Gates (Escape)
  • Frame and Seal Escape Gate
  • Additional Escape Gate
  • Sealed Escape Door with Window
  • 5'6" (Standard) with Options to Increase Heights in 6" Increments
  • Bridle Hooks Welded on Bar
  • Hydraulic Single Leg Jack
  • 3.5K Electric Jack
  • Additional LED Clearance Lights
  • LED Running Lights on Bottom Rail
  • 3/4" LED Button Lights
  • Clear Lens LED Clearance Lights
  • LED Turn Signals Mounted in Fender
  • LED Turn Signals Mounted in Slats
  • Halogen Load Light
  • LED Load Light (1042 Lumens)
  • Halogen High Intensity Load Light Flush Mounted
  • Flush Mount LED Scene Load Light (2500 Lumens)
  • Porch Light
  • LED 6" x 18" Dome Lights (880 Lumens)
  • LED Dome Light Place Under Nose
  • Recessed Lighted Sign for Nose
  • Add Standard LED Dome Lights (390 Lumens)
  • Rubber Floor Mats
  • WERM Flooring
  • Hooks
  • Brush Trays
  • Water Tank and Pump
  • Waterers
  • Misters
  • AM/FM/CD with Inside/Outside and Stock Area Speakers
  • Paint Top Rail
  • Paint Coupler
  • Paint Landing Gear and Handle
  • Paint Drop Gusset
  • Paint Bottom Rail
  • Paint Rear Corner Posts and Rear Header
  • Paint Door or Ramp
  • Paint Smooth Sheets
Pens and Accessories
  • 60/40 or 50/50 Removable Pens with Removable Full Height Posts
  • Adjustable Pens (50/50 and 60/40)
  • Split Pens
  • Add 12" Height to Standard Pen
  • Low Latches on Pen Gates
  • Feeder Bracket Rods
Plexiglass and Track
  • Plexiglass
  • Plexiglass Storage Box
  • 48" Tall Spring Loaded Rear Ramp Behind Doors
  • 52" Tall Spring Loaded Rear Ramp Behind Doors
  • Full Height Spring Loaded Side Ramp
  • Insulate and Line Roof and Top Rail (Natural Aluminum)
  • Insulate and Line Roof and Top Rail (White)
  • Inside Tie Rail
  • Outside Tie Rail (Polished or Unpolished)
  • Lunar Dome Roof Vent
  • Two Way Roof Vent
Wall Lining
  • Line and Insulate Side Walls in Stock (Mill)
  • Line and Insulate Dress Walls (Natural)
  • Line and Insulate Side Walls in Stock (White)
  • Line and Insulate Dress Walls (White)
  • Stainless Steel Simulators
  • Alcoa Aluminum Wheels
  • 6'8" (Standard), 7'6" and 8'

Low Pro Bumper Pull

Standard Trailer Components

All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.
Side Escape Gate
The heavy duty side escape gate is built to be durable and easy to use.
Elite’s proprietary, heavy duty, extruded hinge is used for rear doors & escape gates. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin.
Interior Pens
Interior pens are designed with durable, easy to use and to supply a quiet ride going down the road. The pens are available in multiple types and features Elite’s spring loaded latch mechanism. There is simply not a better pen system available.
Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.
Axles and Tires
Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it’s contents including living quarters.
Bulkhead Wall
.090 smooth sheet welded on to our heavy duty wall post.
Elite only uses HEHR® windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.

Low Pro Bumper Pull

Structure and Construction

Aluminum Side Wall Construction
Elite engineers each trailer to produce the strongest side wall construction layout available. This gives our trailers strength at critical structural points. Each trailer utilizes 6005 T6 aluminum alloy posts with 8” posts at the drop wall, 5” x 1-3/8” at door & gate openings, and 1-3/8” x 2-1/2” on all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125" in thickness. The joints for the interlocking slat allow for a weld surface of up to 2” on the side post. Elite’s tongue and groove slat is designed to accept a smooth aluminum sheet, allowing for better seals, and reducing the chance of leakage. Selected for its excellent corrosive resistance, Elite’s exterior sheets are 3004 aluminum alloy with a H291 temper and a thickness of up to .063".
Rear Frame
The rear frame is supported by a 2-1/2” x 5” upper header of up to a 1/4” thick. Elite utilizes multiple rear frames side posts that are specifically designed for strength. For added strength, the rear frame side post is integrated through the floor into the bottom rail. The rear frame side posts are machine cut to provide a clean, precise fit allowing for a stronger welded structure, resulting in better fitting doors, improved seals, and less noise.
Elite’s floor structure consists of aluminum I-beams on 9-5/8” centers. The I-beam is 4” in height with an upper 3” flange that is welded to the floor and a lower 2 1/2” flange that is welded to the bottom rail. Elite utilizes a 5086 marine grade, aluminum treadplate floor on top of the structure to provide longer lasting protection against corrosive factors such as livestock urine. The seams and perimeter are welded to add strength and insure against leakage.
Top Rail
Elite uses a 5” radius rail with an overall height of 8” with a material thickness of 3/16”. Elite integrates a drip rail to help control streaking. Die lines add to the look while functioning as a guide for uniform placement of fasteners and lighting. Elite uses a continuous top rail piece on each side from front to back, resulting in a stronger, more attractive structure than multiple piece structures used by other manufacturers. The top rail is sanded after production to provide a uniform look and smoothness.
Bottom Rail
With a height of 6-3/4” and a thickness of 3/16”, Elite’s bottom rail is one of the biggest in the industry. This engineered extrusion blends structural strength with an attractive appearance. The extrusion is built with an integrated lip that allows the running board to lock in place.
Roof Construction
The Elite roof is constructed with 1” x 2-1/2” posts that are strategically placed to ensure the maximum strength based on the size and needs of the trailer. The posts are arched to keep water from standing on the roof, producing a taunt roof sheet, allowing more head room in the center of the trailer. Elite’s one piece roof sheet is made of 3003 H16 aluminum and at .040 thick is 25% thicker than the roof sheet used by most other manufacturers.

Low Pro Bumper Pull

Trailer Brochures

Low Pro Bumper Pull

Trailer Floor Plans

Low Pro Bumper Pull

Trailer Photo Galleries

Bumper Pull Low Pro Livestock

Low Pro Bumper Pull

Trailer Downloads

*Interior Company, Specifications & Options may vary based on Dealership


Available in multiple widths, lengths and heights and multiple hauling styles, from slant and straight load models, box stall and reverse loads, Elite Trailers can build a trailer to meet your particular needs.

View Livestock Trailer Galleries

Contact Info

7700 SW 29th St.
OKC, OK 73179

Business Hours

  • MON:8:00AM - 5:00PM
  • TUE:8:00AM - 5:00PM
  • WED:8:00AM - 5:00PM
  • THU:8:00AM - 5:00PM
  • FRI:8:00AM - 5:00PM

Contact Request

Please leave this field empty.

I am not a robot

Copyright © 1995 - 2018 Elite Trailer MFG, LLC. All Rights Reserved.