Stock Combo Horse Trailers

bp-stock-combo
Sample images are shown in various trailer sizes with additional options and features.
  • Features
  • Options
  • Components
  • Structure
  • Brochures
  • Floor Plans
  • Gallery
  • Downloads

Stock Combo Horse Trailers

Standard Trailer Features

bp-stock-combo
Sample images are shown in various trailer sizes with additional options and features.

Custom Elite Bumper Pull Stock Combo Horse Trailers are engineered to deliver rugged good looks and the durability to stand up to a wide range of hauling. With a heavy duty, engineered structure the Elite Horse Trailer works hard with you, not against you. Available in multiple widths, lengths and heights and multiple hauling styles, Elite Trailers can build a trailer to meet your particular needs.

Stock Combo Horse Trailer
  • 2-5/16" Bulldog Coupler with Safety Chains and Breakaway Kit
  • Full Length Side Slats with Two Air Spaces and White Smooth Sheets
  • 8,000#, 2" Square Drop Leg Jack
  • Flat Nose
  • Rubber Torsion Axles with Electric Brakes
  • Radial Tires with Steel Wheels
  • Stainless Steel Hub Caps
  • Full Width Rear Gate and Pipe Hardware
  • Dressing Room Door with HEHR Window and Camper Latch
  • Streetside Escape Gate at 1st Horse with Breast Bar
  • .125 Smooth Aluminum Floor (5052 Marine Grade)
  • One Exterior Tie per Stall
  • Two Interior Ties per Stall
  • Bulkhead Wall
  • Rubber on Bulkhead Wall (Stock Side)
  • Extruded Dividers with Stall Pads
  • Premium Rubber Mats on Floor in Horse Area
  • Marine Carpet on Floor, Drop and Bed in Dress
  • 7 Way Plug and Wiring
  • LED High and Low Turn Signals at Rear
  • LED Dome and Clearance Lights
  • Recessed Exterior Light Switches
  • One Saddle Rack per Stall
  • 10 Bridle Hooks

Stock Combo Horse Trailers

Popular Trailer Options

Stock Combo
Air Conditioners
  • 13,500 BTU Air Conditioner Unit with Heat Strip
  • 13,500 BTU Low Profile Air Conditioner with Heat Strip and Thermostat
  • Pre-Wiring for Future A/C Unit
Awnings
  • Domestic 2 Step Awning
Axles
  • Ridewell Semi Style Air Ride
  • EZ Lube Axles
  • Oil Bath Axles
  • Tapered Inner Fenders
Bars
  • Carpeted Splint Boot Bars
  • Swing out Blanket Bars
  • Full Height Blanket Tree
  • Swinging and Removable Blanket Tree
Batterys and Boxes
  • Single Battery Box
  • Dual Battery Box
  • Single Battery Box with Battery
  • Dual Battery Box with (2) Batteries
  • 3' Carpeted Boot Box with Lid
  • 4' Carpeted Boot Box with Lid
  • Full Width, Padded Boot Box with Dual Lids
  • Full Width, Carpeted Boot Box with Dual Lids
Brakes
  • Electric / Hydraulic Brakes
  • Electric / Hydraulic "Disc" Brakes
Carpet
  • Carpeted Walls and Doors in Rear Tack
  • Carpeted Walls in Dress
  • Carpeted Bulkhead Wall in Dress
  • Line/Insulate/Carpet Walls in Dress
Clothes Rods
  • Clothes Rod (5 Feet)
  • Clothes Rod (5+ Feet)
Coupler
  • Extended Tongue
Dividers
  • Flow Thru Divider and Head Shield
  • Full to Bottom Divider
  • Full to Top Divider
  • Removable Lower Divider Panel
  • Hanging Rubber on Divider
Door (Dress/Tack Room)
  • Additional Width to Dressing Room (37" to 50")
  • HEHR Camper Door with Window and Screen
  • Additional Dress Doors
Doors (Drop Down, Access and Walk Thru)
  • Walk Thru Door in Bulkhead
  • Access Door
Door (Rear)
  • Double Rear Gates with Double Pipe Hardware
  • Double Rear Doors with Windows and Permanent Post
  • Double Pipe Hardware on Rear Doors (No Center Post)
  • Rear Load Door with Streetside Entry Rear Tack Door
  • Removable Posts on Rear Door
  • Hinge Rear Tack Door on Center Post
  • Full Width Rear Ramp with Two Dutch Doors Above
  • Single 48" Door in Center of Rear (Full Width Rear Tack)
  • Rear Gate with 1/2 Slide Gate
  • 50/50 Double Rear Doors with Windows, Internal Latch, Camper Latch and Combo Lock (Full Width Rear Tack)
Electrical
  • Breaker Box, (1)110v Outlet and Shore Plug
  • Shore Power Cord, 30amp or 50amp
  • Addition 110v Outlet
  • Voyager IR Color Camera Systems
Exterior Skin
  • Pre-Painte White Exterior Skin (Standard)
  • Mill Finish (Natural) Exterior Skin
  • Pre-Painted Black Exterior Skin
  • Pre-Painted Gray Exterior Skin
  • Pre-Painted Red Exterior Skin
  • Custom Painted Exterior Sheets
  • Stainless Nose Sheet
  • Stainless Steel Side Sheets
  • Polished Slat
  • Polished Fenders
  • Polished Top Rail
  • Polished Bottom Rail
  • Polished Door Frames and Flush Mount
  • Polished Rear Corner Posts and Rear Header
Footage
  • Add Length to Dressing Room
  • Add Length to Horse Area
  • Delete Length from Dressing Room
  • Delete Length from Horse Area
Generator Compartments
  • Generator Shelf and Vented Door (Rear Tack)
  • Generator Compartment in Last Manger with Vented Door (24" Manger)
  • 48" Deep, Full Width Generator Platform on Roof with No Box
  • 48" Deep, Full Width Platform on Roof with Vented Generator Box
  • Generator Platform with Vented Box
  • Vented Generator Box Located in Hay Rack
Hay Rack
  • Hay Rack with Aerodyne Nose and Tie Rails
  • Enclosed Haypod with Aerodyne Nose
  • Enclosed Haypod with Extended Sides and Aerodyne Nose
  • Integrated Haypod
  • Recessed Ladder
  • Telescoping Ladder
Height
  • 7' (Standard) with Options to Increase Height in 6" Increments
Hooks
  • Bridle hooks Welded on Bar
Jacks
  • 3.5K Electric Jack
  • Equalizer Hydraulic Single Leg Jack
Latch
  • Chrome Latches
Lights
  • Clear Lens LED Clearance Lights
  • Additional LED Clearance Lights
  • LED Running Lights on Bottom Rail
  • Backup Lights
  • 3/4" LED Button Lights (Replaces Standard Lights)
  • Add Standard LED Dome Lights (390 Lumens)
  • Extra LED Turn Signals Mounted in Fender
  • Extra LED Turn Signals Mounted in Slats
  • Halogen Load Lights
  • Halogen High Intensity Load Light
  • LED Load Light
  • LED Scene Load Light Flush Mounted
  • Porch Light
  • LED 6" x 18" Dome Lights (880 Lumens)
Lock
  • Keyless Combination Deadbolt Lock
Mangers
  • 18" Deep Mangers (1 Door Every Two Mangers)
  • 24" Deep Mangers (1 Door Every Two Mangers)
  • Lower Front of Mangers 1-1/2"
  • Additional Manger Access Doors
  • Solid Partition in Manger
  • Rubber on Inside Wall of Manger
Paint
  • Paint Top Rail
  • Paint Smooth Sheets
  • Paint Side Slat
  • Paint Coupler
  • Paint Landing Gear
  • Paint Bottom Rail
  • Paint Rear Corner Posts and Rear Header
  • Paint Door or Ramp
Plexiglass
  • Plexiglass
Ramps
  • 48" Tall Spring Loaded Rear Ramp
  • 52" Tall Spring Loaded Rear Ramp
  • Rear Tack
  • Permanent Rear Tack
  • Permanent Rear Tack Sealed to Top
  • Streetside Entry Rear Tack
  • Full Width Rear Tack
  • Collapsible Rear Tack and Removable Saddle Rack and Rear Post
Roof
  • Insulate and Line Roof and Top Rail (Natural Aluminum)
  • Insulate and Line Roof and Top Rail (White)
Rubber
  • Rubber Both Sides of Removable Panel or Full to Floor Divider
  • Add Rubber on Top 1/2 of Bulkhead Wall (Horse Area Side)
  • Rubber on Top 1/2 of Rear Tack Wall
Saddle Racks
  • Additional Racks
  • Extra Saddle Rack Locations
  • Removable Saddle Rack Post
  • Swinging Saddle Rack
  • Removable Saddle Rack from Post
  • Make Saddle Rack up to 12" Longer
  • Delete Saddle Racls
Shelf
  • Corner "V" Shelf
  • Hat Shelf with Clothes Underneath
  • Hat Shelf with Bridle Hooks Underneath
  • Hat Shelf Only
  • Fold Up Shelf
  • Removable Shelf
Steps
  • Fold Up Camper Step (Dress, Escape and Rear Tack Doors)
  • Step Cleats
Trays
  • Additional Brush Trays
Ties
  • Welded Trailer Ties (Interior)
  • Bolted Ties (Exterior)
  • Bolted Stainless Steel Ties (Exterior)
Vents
  • Lunar Dome Roof Vent
  • Two Way Roof Vent
  • 12v Fans
Water Tanks
  • Aluminum Water Tank, 25-50 Gallons
  • Water Pump for Tank
  • 25 Gallon V-Style Plastic Tank and Stand
  • 50 Gallon Plastic Tank with Pump
  • 100 Gallon Plastic Water Tank with Pump
Wall Lining
  • Line, Insulate and Rubber Stock Side Walls
  • Line and Insulate Dress Wall (White)
  • Line and Insulate Dress Wall (Natural Aluminum)
Wheels
  • Alcoa Aluminum Wheels
Width
  • 7' (Standard), 7'6", 8', 100" and 102"
Windows (Multiple Sizes)
  • Sliding
  • Jalousie

Stock Combo Horse Trailers

Standard Trailer Components

Doors
All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.
Drop Bars
Elite built drop down bar mechanism is machined to allow easy of use. Independent from the drop down door allows for simple use.
Lighting
Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.
Horse Dividers
With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength.
Bulkhead Wall
.090 smooth sheet welded on to our heavy duty wall post.
Rear Tack Walls
The tack room is available in multiple types with rear or side entry.
Lining and Insulation
With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.
Axles and Tires
Elite uses Dexter Rubber Torsion Axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it's contents including living quarters.
Hinges
Elite's proprietary, heavy duty, extruded hinge is used for doors and dividers. This hing is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.
Windows
Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.
Saddle Racks
The Elite built carpeted saddle racks are designed to hold a large variety of today's saddles.
Wall Rubber
The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.
Carpet
Marine grade carpeting is used in the tack room and other applications to assure a long life.

Stock Combo Horse Trailers

Structure and Construction

Top Rail
Continuous 5" radius rail with an overall height of 8" and a material thickness of 3/16" with an integrated drip rail.
Flooring
Elite's floor structure consists of 4" I beams with an upper 2 1/2" flange and a lower 3" flange on 12" centers. Elite utilizes a .125" thick, 5052 Marine Grade sheet floor on top of the structure.
Rear Frame
The rear frame is supported by a 2 1/2" x 5" upper header at a 1/4" thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.
Aluminum Side Wall Construction
6005 T6 Aluminum alloy posts with 7" posts at the drop wall, 5" x 1 3/8" at doors and dividers and 1 3/8" x 2 1/2" for all other side wall structure posts.

The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063".
Roof Construction
1" x 2 1/2" arched roof bows with one piece, .040 thick 3003 H16 aluminum roof sheet.

Stock Combo Horse Trailers

Trailer Brochures

Stock Combo Horse Trailers

Trailer Floor Plans

Stock Combo Horse Trailers

Trailer Photo Galleries

Stock Combo Bumper Pull

Stock Combo Horse Trailers

Trailer Downloads

*Interior Company, Specifications & Options may vary based on Dealership

GENERAL INFORMATION

Available in multiple widths, lengths and heights and multiple hauling styles, from slant and straight load models, box stall and reverse loads, Elite Trailers can build a trailer to meet your particular needs.

Contact Info

info@elitetrailers.com
7700 SW 29th St.
OKC, OK 73179
405-745-5757

Business Hours

  • MON:8:00AM - 5:00PM
  • TUE:8:00AM - 5:00PM
  • WED:8:00AM - 5:00PM
  • THU:8:00AM - 5:00PM
  • FRI:8:00AM - 5:00PM
  • SAT:CLOSED
  • SUN:CLOSED

Contact Request





Please leave this field empty.

I am not a robot

Copyright © 1995 - 2017 Elite Trailer MFG, LLC. All Rights Reserved.