Slant Load Horse Trailers

Sample images are shown in various trailer sizes with additional options and features.
  • Features
  • Options
  • Components
  • Structure
  • Brochures
  • Floor Plans
  • Gallery
  • Downloads

Slant Load Horse Trailers

Standard Trailer Features

Sample images are shown in various trailer sizes with additional options and features.

Custom Elite Horse Trailers are engineered to deliver rugged good looks and the durability to stand up to a wide range of hauling. With a heavy duty, engineered structure the Elite Horse Trailer works hard with you, not against you. Available in conventional slant & straight load models, Elite Trailers can build a trailer to meet your particular needs.

Conventional slant load trailers are one of the prevalent designs in the market today. Available in multiple widths, lengths and heights, our standard slant load trailers are designed with your horses safety in mind. Custom models are available to haul with different load choices.

Slant Load Horse Trailer
  • 2-5/16" Bulldog Coupler
  • 8,000, 2" Square Drop Leg Jack
  • 3' Wedge Nose
  • Rubber Torsion Axles with Electric Brakes
  • Radial Tires with Steel Wheels
  • Stainless Steel Wheel Simulators
  • Full Length Side Slats with White Smooth Sheets Above
  • Drop Down Feed Doors with HEHR Windows (Head Side)
  • .125 Smooth Aluminum Floor (5052 Marine Grade)
  • Dressing Room Door with Camper Latch and HEHR Window
  • 56/44 Double Rear Doors with HEHR Windows and Locking Seal Plates
  • Escape Door on Streetside at 1st Horse with Locking Seal Plate
  • Breast/Butt Bars at All Horse Area Doors
  • Two Exterior and Interior Ties (per Stall)
  • HEHR 15"x34" Sliding Windows (Hip Side)
  • Lined and Insulated Head and Rump Walls
  • Rubber on Wall at Hip/Head/Wall in Horse Area
  • Premium Rubber Mats on Floor in Horse Area
  • Extruded Dividers with Stall Pads
  • On Roof Vent per Stall
  • One Feed Bag per Horse
  • 7 Way Plug and Wiring
  • Halogen Load Light at Rear
  • LED High and Low Turn Signals at Rear
  • LED Dome and Clearance Lights
  • Bulkhead Wall
  • Recessed Exterior Light Switches
  • Permanent Rear Tack Compartment
  • One Saddle Rock per Horse
  • 10 Bridle Hooks
  • Blanket Bar
  • Brush Trays
  • Marine Carpet on Dress Floor, Drop and Bed

Slant Load Horse Trailers

Popular Trailer Options

Slant Load
Air Conditioners
  • 13,500 BTU Air Conditioner with Heat Strip
  • 13,500 BTU Low Profile Air Conditioner Unit with Heat Strip and Thermostat
  • Pre-wiring for Future A/C Unit
  • Domestic 2 Step Awning
  • Ridewell Semi Style Air Ride
  • EZ Lube Axles
  • Oil Bath Axles
  • Tapered Inner Fenders
  • Drop Down Window Bars for Feed Doors
  • Carpeted Splint Boot Bars
  • Swing Out Blanket Bars
  • Full Height Blanket Tree
  • Swinging and Removable Blanket Tree
Battery and Boxes
  • Single Battery Box
  • Dual Battery Box
  • Single Battery Box with Battery
  • Dual Battery Box with (2) Batteries
  • 3' Carpeted Boot Box with Lid
  • 4' Carpeted Boot Box with Lid
  • Full Width, Carpeted Boot Box with Dual Lids
  • Electric / Hydraulic Brakes
  • Electric / Hydraulic "Disc" Brakes
  • Carpeted Walls and Door in Rear Tack
  • Carpeted Walls in Dress
  • Carpeted Bulkhead Wall in Dress
  • Line/Insulate/Carpet Walls in Dress
Clothes Rods
  • Clothes Rod (5 Feet)
  • Clothes Rod (5+ Feet)
  • Extended Tongue
  • Flow Thru Divider and Head Shield
  • Full to Bottom Divider
  • Full to Top Divider
  • Telescoping Divider
  • Removable Lower Divider Panel
  • Hanging Rubber on Divider
Door (Dress/Tack Room)
  • Additional Width to Dressing Room (37" to 50")
  • Double Side Tack Doors with Single Pipe Hardware
  • Double Side Tack Doors with Internal Latches
  • HEHR Camper Door with Window and Screen
  • Additional Dress Doors
Door (Drop Down, Access and Walk Thru)
  • Walk Thru Door in Bulkhead
  • Access Door
  • Drop Down Door in Rear Load Door
  • Drop Down Door with Window on Curbside in lieu of Bus Windows
Door (Escape)
  • Escape Door at 1st Horse (Curbside)
  • Delete Escape Door
  • 3/4 Escape Door
Door (Rear)
  • 56/44 Rear Door Setup (Standard)
  • 60/40 Rear Door Setup
  • 50/50 Rear Door Setup
  • Hinge Rear Tack Door on Center Post
  • Double Rear Doors with Single Pipe Hardware
  • Double Rear Doors with Double Pipe Hardware
  • Rear Load Door with Streetside Side Entry Rear Tack
  • Full Width Rear Ramp with Two Dutch Doors Above
  • Single 48" Door in Center of Rear (Use with Full Width Rear Tacks)
  • 50/50 Double Rear Doors with Windows and Internal Latches (Use on Full Width Rear Tacks)
  • Breaker Box, (1)110v Outlet and Shore Plug
  • Shore Power Cord, 30amp or 50amp
  • Additional 110v Outlet
  • Voyager IR Color Camera Systems
Exterior Skin
  • Pre-Painted White Exterior Skin (Standard)
  • Mill Finish (Natural) Exterior Skin
  • Pre-Painted Black Exterior Skin
  • Pre-Painted Gray Exterior Skin
  • Pre-Painted Red Exterior Skin
  • Custom Painted Exterior Sheets
  • Stainless Nose Sheet
  • Stainless Steel Side Sheets
  • Polished Slat
  • Polished Fenders
  • Polished Top Rail
  • Polished Bottom Rail
  • Polished Rear Corner Posts and Rear Header
  • Two Air Spaces on Curbside in lieu of Bus Windows
  • Polished Door Frames and Flush Mount
  • Add Footage to Dressing Room
  • Add Footage to Horse Area
  • Delete Footage from Dressing Room
  • Delete Footage from Horse Area
Generator Compartments
  • 48" Deep, Full Width Generator Platform on Roof with No Box
  • 48" Deep, Full Width Platform on Roof with Vented Generator Box
  • Generator Shelf and Vented Door (Rear Tack)
  • Generator Compartment in Last Manger
  • Generator Platform with Vented Box
  • Vented Generator Box Located in Hay Rack
Hay Rack
  • Hay Rack with Aerodyne Nose and Tie Rails
  • Enclosed Haypod with Aerodyne Nose
  • Enclosed Haypod with Extended Sides and Aerodyne Nose
  • Integrated Haypod
  • Recessed Hay Rack Ladder
  • 7' (Standard) with Options to Increase Height in 6" Increments
  • Additional Bridle Hooks
  • 3.5K Electric Jack with Battery
  • Equalizer Hydraulic Single Leg Jack
  • Add Camper Door Latch to Escape Door or Any Door
  • Chrome Handles and Latches
  • Clear Lens LED Clearance Lights
  • Additional LED Clearance Lights
  • LED Running Lights on Bottom Rail
  • Backup Lights
  • 3/4" LED Button Lights (Replaces Standard Lights)
  • Add Standard LED Dome Lights (390 Lumens)
  • Extra LED Turn Signals Mounted in Fender
  • Extra LED Turn Signals Mounted in Slats
  • Halogen Load Lights
  • Halogen High Intensity Load Light
  • LED Load Light
  • LED Scene Load Light Flush Mounted
  • Porch Light
  • LED 6" x 18" Dome Lights (880 Lumens)
  • LED Dome Light Place Under Nose
  • Keyless Combination Deadbolt Lock
  • 18" Deep Manger (1 Door Every 2 Mangers)
  • 24" Deep Manger (1 Door Every 2 Mangers)
  • Lower Front of Manger 1-1/2"
  • Additonal Manger Access Doors
  • Add Solid Partition in Manger Storage
  • Add Rubber on Inside Wall of Manger
  • Swing Out Manger with Access Door on Escape Door
  • Rubber Floor Mats
  • WERM Flooring
  • Equifoam Under Floor Mats
  • Tread Plate Gravel Guard (18")
  • Paint Top Rail
  • Paint Smooth Sheets
  • Paint Side Slat
  • Paint Coupler
  • Paint Landing Gear
  • Paint Bottom Rail
  • Paint Rear Corner Posts and Rear Header
  • Paint Door or Ramp
  • Plexiglass
  • 48" Tall Spring Loaded Rear Ramp
  • 52" Tall Spring Loaded Rear Ramp
  • Side Ramp
Rear Tack
  • Permanent Rear Tack Sealed to Roof
  • Streetside Side Entry Rear Tack
  • Full Width Rear Tack
  • Collapsible Rear Tack and Removable Saddle Rack Post
  • Insulate and Line Roof and Top Rail (Natural Aluminum)
  • Insulate and Line Roof and Top Rail (White)
  • Rubber Both Sides of Removable Panel or Full to Floor Divider
  • Add Rubber on Top 1/2 of Bulkhead Wall (Horse Area Side)
  • Add Rubber on Top 1/2 of Rear Tack Wall
Saddle Racks
  • Additional Racks
  • Extra Saddle Rack Locations
  • Removable Saddle Rack Post
  • Swinging Saddle Rack
  • Removable Saddle Rack from Post
  • Make Saddle Rack up to 12" Longer
  • Delete Saddle Racks
  • Corner "V" Shelves
  • Hat Shelf with Clothes Underneath
  • Hat Shelf with Bridle Hooks Underneath
  • Hat Shelf Only
  • Fold Up Shelf
  • Removable Shelf
  • Fold Up Camper Step (Dress, Escape and Rear Tack Doors)
  • Step Cleats
  • Additional Brush Trays
  • Welded Trailer Ties (Interior)
  • Bolted Ties (Exterior)
  • Bolted Stainless Steel Ties (Exterior)
  • Lunar Dome Roof Vent
  • Two Way Roof Vent
  • 12v Fans
Water Tanks
  • Aluminum Water Tank, 25-50 Gallons
  • Water Pump for Tank
  • 25 Gallon V-Style Plastic Tank and Stand
  • 50 Gallon Plastic Tank with Pump
  • 100 Gallon Plastic Water Tank with Pump
Wall Lining
  • Line and Insulate Dress Wall (Natural Aluminum)
  • Line and Insulate Dress Wall (White)
  • Alcoa Aluminum Wheels
  • 7' (Standard), 7'6", 8', 100" and 102"
Windows (Multiple Sizes)
  • Sliding
  • Jalousie
  • Kickout

Slant Load Horse Trailers

Standard Trailer Components

All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal.
Drop Bars
Elite built drop down bar mechanism is machined to allow easy of use. Independent from the drop down door allows for simple use.
Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material.
Horse Dividers
With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength.
Bulkhead Wall
.090 smooth sheet welded on to our heavy duty wall post.
Rear Tack Walls
The tack room is available in multiple types with rear or side entry.
Lining and Insulation
With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings.
Axles and Tires
Elite uses Dexter Rubber Torsion Axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it's contents including living quarters.
Elite's proprietary, heavy duty, extruded hinge is used for doors and dividers. This hing is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible.
Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free.
Saddle Racks
The Elite built carpeted saddle racks are designed to hold a large variety of today's saddles.
Wall Rubber
The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products.
Marine grade carpeting is used in the tack room and other applications to assure a long life.

Slant Load Horse Trailers

Structure and Construction

Top Rail
Continuous 5" radius rail with an overall height of 8" and a material thickness of 3/16" with an integrated drip rail.
Elite's floor structure consists of 4" I beams with an upper 2 1/2" flange and a lower 3" flange on 12" centers. Elite utilizes a .125" thick, 5052 Marine Grade sheet floor on top of the structure.
Rear Frame
The rear frame is supported by a 2 1/2" x 5" upper header at a 1/4" thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail.
Aluminum Side Wall Construction
6005 T6 Aluminum alloy posts with 7" posts at the drop wall, 5" x 1 3/8" at doors and dividers and 1 3/8" x 2 1/2" for all other side wall structure posts.

The exterior, 6063 aluminum interlocking extruded slat is .125 thick. Exterior smooth sheets are a 3004 aluminum alloy with a H291 temper and thickness of up to .063".
Roof Construction
1" x 2 1/2" arched roof bows with one piece, .040 thick 3003 H16 aluminum roof sheet.

Slant Load Horse Trailers

Trailer Brochures

Slant Load Horse Trailers

Trailer Floor Plans

Slant Load Horse Trailers

Trailer Photo Galleries

Bumper Pull Slant Load

Slant Load Horse Trailers

Trailer Downloads

*Interior Company, Specifications & Options may vary based on Dealership


Available in multiple widths, lengths and heights and multiple hauling styles, from slant and straight load models, box stall and reverse loads, Elite Trailers can build a trailer to meet your particular needs.

Contact Info
7700 SW 29th St.
OKC, OK 73179

Business Hours

  • MON:8:00AM - 5:00PM
  • TUE:8:00AM - 5:00PM
  • WED:8:00AM - 5:00PM
  • THU:8:00AM - 5:00PM
  • FRI:8:00AM - 5:00PM

Contact Request

Please leave this field empty.

I am not a robot

Copyright © 1995 - 2018 Elite Trailer MFG, LLC. All Rights Reserved.